Union Jack Flag  ENGLISH

Handles

Home | Handles | Push-Button Handle

Push-Button Handle

An attractively styled handle, suitable for all personnel and compartment doors, and moulded in impact-resistant material with textured finish. This is a ‘free wheeling’ design, so the handle can never be forced when the button is in the locked position.
9/01901
9/01901
9/01901
9/01901
9/01900
9/01900
9/01900
9/01900

Ordering Code

9/01900 Push-button handle, ‘FT’ locking
9/01900/01 Push-button handle, ‘FT111’ keys
B23-Diagram 01
B23-Diagram 02
B23-Diagram 03

Specification

All dimensions shown are rounded to the nearest millimetre. Please request a drawing for the exact product specific and tolerances.

A Length 183 mm
B Width (max) 47 mm
C Height 36 mm
D Projection (rest) 32 mm
E Diameter 28 mm
F Hole centres 120 mm
G Hole centres 18 mm
H Holes M6 x 10 mm
J Grip height 28 mm
K Travel (vertical) 14 mm
L Travel (locking) 22 mm
Materials: Handle moulding in 30% glass filled acetalcopolymer. Button in zinc alloy diecast,chromium plated. Contactor in steel, zinc plated. Alternative Contactors: See page A10 for latch-push dimensions and alternatives.
  • Moulded push-button handle with diecast button and lock cylinder, providing good grip for gloved hand.
  • Steel contactor travels 14mm downwards when button is depressed. When locked, contactor cam rotates 180° out-of-position to disengage from the latch mechanism.
  • Fixing beneath into three brass inserts, threaded M6 x 10mm deep, gaskets provided.
  • Fitted with double-sided ‘FT’ keys. Can also be supplied with ‘FS’, ‘92’ or DLP key styles.
  • Finish is self-colour black textured surface, bright chrome button.
  • Special options include supply as pairs or sets, standard key number (FT111) or alternative contactor plates.
  • Moulded in 30% mineral-filled polyethylene.

Get in touch today!

contact us