Union Jack Flag  ENGLISH

Catches & LatchesSlam Latches

Home | Catches & Latches | Moulded Slam Latches

Moulded Slam Latches

The unique design of these latches allows ‘fix through’ mounting to suit narrow door pillars, sections and channels. Moulded construction provides the benefits of lightweight, selflubricating action, and total corrosion resistance at an inexpensive price.
9/01528
9/01528
9/01528
9/01528
9/01529
9/01529
9/01529
9/01529
9/01530
9/01530
9/01530
9/01530

Ordering Code

9/01528 Moulded slam latch, reversed knob
9/01529 Moulded slam latch, pull-knob fitment
9/01530 Moulded slam latch
D7-Diagram 01
D7-Diagram 02
D7-Diagram 03
D7-Diagram 04

Specification

All dimensions shown are rounded to the nearest millimetre. Please request a drawing for the exact product specific and tolerances.

A Body Length 80 mm
B Body Width 29 mm
C Body Height 18 mm
D Bolt Projection 16 mm
E Location 23 mm
F Location 44 mm
G Location 25 mm
H Hole Diameter Ø 6 mm
J Slot Dimension 7×20 mm
K Knob Diameter Ø 38 mm
L Knob Height (max) 16 mm
Spring pressure: 6kg to full bolt withdrawal
  • Basic Latch (9/01530) is operated by rod or cable as part of a slam system. Single-point models use a large knurled knob for good grip.
  • Slam bolt retracts fully into case when operated. Slotted bolt-pull provides ‘lost-motion’ so latches can always be slammed, even when a system is in ‘locked’ mode.
  • Fixing by rivets through 6mm holes in case. Use large-headed fasteners to spread load over area.
  • Latches are self-coloured black with attractive textured finish.
  • Moulded in acetal copolymer, with stainless steel spring.
  • Tooling allows special bolt nose shapes to be made, subject to economical minimum batches.
  • Cycle Testing: The slam latch 9/01530 was tested to over 50,000 cycles of slam and withdrawal with no appreciable wear to bolt-nose or bolt-pull.

Get in touch today!

contact us