Union Jack Flag  ENGLISH

Catches & LatchesSlam Latches

Home | Catches & Latches | Heavy-Duty Slam Latches

Heavy-Duty Slam Latches

Exceptionally robust latches with fitted release handle for easy operation. There is a steel follow-bush so that when fitted on inside of a door, latch can be operated from outside by a standard 8mm square shaft. Suitable for heavy compartment doors and some types of off-road vehicle cabs.
9/00805
9/00805
9/00805
9/00805
9/00806
9/00806
9/00806
9/00806

Ordering Code

9/00805 Slam latch LH, with handle
9/00806 Slam latch RH, with handle
D12-Diagram 02
D12-Diagram 03
D12-Diagram 01

Specification

All dimensions shown are rounded to the nearest millimetre. Please request a drawing for the exact product specific and tolerances.

A Case length 70 mm
B Case Width 64 mm
C Case Height 20 mm
D Bolt Width 19 mm
E Bolt Projection 15 mm
F Location (bush) 32 mm
G Handle Length 165 mm
H Hole Size (dia) 5 mm
J Handle Height 90 mm
- Depth under case 4 mm
- Total bolt withdraw 10mm
- Total handle movement 45˚
- Min. load for full bolt retraction 10kg
  • Latch slams against door edge on ramped striker, is released by fitted handle or from reverse side through 8mm square follow bush.
  • Handle movement 45°, LH/RH as shown, with four options available.
  • Plant-on fixing by bolts or rivets through 5mm diameter holes on flanges. There is a bottom projection of 4mm on follow-bush for location purposes.
  • Zinc-plated, with black, nylon-dipped handle.
  • Bolt shape a.nd projection variable, although total travel cannot be altered.
  • Use with any of our diecast locking handles with 8mm square shaft.

Get in touch today!

contact us