Union Jack Flag  ENGLISH

Grab & Trim Items

Home | Grab & Trim Items | Foamed Steel-Cored Grab Rail – 300mm

Foamed Steel-Cored Grab Rail – 300mm

Moulded in expanded polyurethane foam, this handle has a soft, resilient surface and no sharp edges, while the steel core provides strength and rigidity. This modern design replaces traditional steel stanchion rails, and ensures safety and comfort when used as a grab, or entryassist rail.
9/01725
9/01725
9/01725
9/01725
9/01725/03
9/01725/03
9/01725/03
9/01725/03

Ordering Code

9/01725 300mm grab rail-black
9/01725/03 300mm grab rail, yellow, RAL 1021

Specification

All dimensions shown are rounded to the nearest millimetre. Please request a drawing for the exact product specific and tolerances.

A Body Length 300 mm
B Body Width 102 mm
C Body Height 75 mm
D Hole centres 165 mm
E Hole centres 213 mm
F Cross section 25 mm
H Hole sizes (core) 10 mm steel reinforcement core. 7 mm
Plug diameter 15mm accepting bolts to 12mm head diameter x 7mm shank. Plug ref. 5/00538 (specify colour).
Note: Rigid steel core means that handle cannot be ‘flexed’ to accommodate deviations in fixing holes.
  • Soft, padded surface. No sharp edges, for maximum safety. Triangular section for good grip. Mounting holes concealed by ‘snap-in’ plugs.
  • Attractive, textured finish. Standard colours are black and yellow. Other colours can be moulded subject to batch-quantity requirements.
  • Fixing by bolting through four holes in steel core. Handle cannot be ‘flexed’.
  • Moulded in expanded polyurethane foam around solid,10mm steel rod. Meets EC 95/28/CE regulations for combustibilty ( less than 100mm per minute).
  • LOAD TESTING:
    Tests carried out by an independent proof house gave following results: Parallel to fixing, load 3.70 Kilo-Newtons (377Kg) before distortion. Vertical to fixing, load 3.56 Kilo-Newtons (363Kg) before distortion. With ultimate strength over 1 tonne we recommend a safe working load of 250Kg (550lbs) max.

Get in touch today!

contact us