Union Jack Flag  ENGLISH

Latching Systems

Home | Latching Systems | Drop-T 3-Way Non Locking Latch System

Drop-T 3-Way Non Locking Latch System

The multi-point ‘Drop-T’ is available as non-locking versions, usually with centre latching tongue and rods. Rods attached on site and adjustable for either LH or RH movement.
C28-Product 01
C28-Product 01
C28-Product 02
C28-Product 02

Ordering Code

9/01563 3-way Drop-T set, stainless, non locking, c/w rods
9/01564 3-way Drop-T set, mild steel, non locking, c/w rods
9/01569 Centre only, 3-way, stainless, non locking
C28-Diagram 01
‘Cranked down’ 3-way tongue can be shaped to increase ‘I’ dimensions
Suffix A I=32mm
Suffix B I=37mm
C28-Diagram 02
‘Cranked down’ ‘Cranked up’ 3-way tongue can be shaped to reduce ‘I’ dimensions
Suffix A I=22mm
Suffix B I=17mm
C28-Diagram 03
C28-Diagram 04

Specification

All dimensions shown are rounded to the nearest millimetre. Please request a drawing for the exact product specific and tolerances.

A Width of pan 120 mm
B Length of pan 100 mm
C Hole centres 69 mm
D Hole centres 90 mm
E Max depth 45 mm
F Rod fixing centre 52 mm
G Length of latch Cam depth 70 mm 3 mm
H Hole sizes (dia) 7.5 mm
I Engagement 27 mm
J Visible length 30 mm
K Rod length 1145 x 9.5 mm (dia)
Rods withdraw by 25mm in line of travel, as latch disc rotates through 90°. Illustration shows 3-way centre with tongue cranked down to 37mm. <br> Also visible are pillar-rivets for attachment of rods, and screws to set ‘L’ or ‘R’ movement
  • Polished diecast ‘hub’, and neoprene seal under stainless ‘cup’ washer for good appearance, corrosion-resistance and weatherproofing.
  • Lift handle to turn, releasing latch tongue and withdrawing rods. Reverse to close-tongue has 5mm cam-form for easy engagement.
  • Latch travels 90° from centre against ‘stops’, which can be adjusted to allow either LH or RH operation.
  • Polished stainless steel with chrome handle and hub, or mild steel, zinc-plated. Optionally, black powder-coated finish.

Get in touch today!

contact us