Union Jack Flag  ENGLISH

Catches & Latches

Home | Catches & Latches | Door Hold-Back with Inside Release

Door Hold-Back with Inside Release

This unit is smaller, stronger, and more forgiving of misalignment than our previous model. Completely redesigned as a diecast assembly, it is fitted to the mounting surface through two hollow rivets as shown.

There is an adjustable striker pin, with moulded ‘buffer’ to cushion impact. The striker is released by gentle pressure on inside handle.

Intended to hold back doors and windows on tractor cabs and similar machines, the pin-&-socket action allows the unit to be used elsewhere, particularly when fitted with linkage for remote-actuation.
5/01664
5/01664
5/01664
5/01664
9/01951
9/01951
9/01951
9/01951

Ordering Code

9/01951 Door holdback & striker pin
5/01664 Moulded handle only, red
D23-Diagram 01
Total handle movement either direction to release striker automatic spring - back centering
D23-Diagram 02
D23-Diagram 03
D23-Diagram 04
Striker pin diameter = 8mm
M8 nut, spring washer & 2-off 30mm washers provided

Specification

All dimensions shown are rounded to the nearest millimetre. Please request a drawing for the exact product specific and tolerances.

A Total width 78mm
B Faceplate height 45 mm
C Aperture (dia) 18 mm
D Case depth 13 mm
E Handle height 60 mm
F Max. depth 67 mm
G Hole centres 62 mm
H Holoe dimensions (dia) 5.5 mm
J Striker total length 47 mm
Striker assembly (adjustable) – Comprises threaded steel pin, nut, washers, moulded ‘buffer’ and steel locking plate. Finish is zinc plated, normally supplied unassembled.
  • Steel striker is mounted onto door exterior, holdback is fitted into panel so that striker slams into hardened steel jaws.
  • Gentle pressure on inside handle (in either direction) releases jaws, and a spring ejects striker with some force.
  • Holdback is inserted through panel cut-out and fixed through two hollow rivets. (Handle can be attached separately). Striker pin threaded and provided with nut, washers and moulded ‘buffer’.
  • Black powder-coated with black moulded handle (optionally red). Striker pin & washers are zinc-plated.
  • - Handle can be fitted at any 90˚ position
    - Length of operating shaft can be varied to suit door thickness
    - Alternative handles
    - Remote-operated models

Get in touch today!

contact us