Union Jack Flag  ENGLISH

Latching Systems

Home | Latching Systems | 2-Way Slam Systems

2-Way Slam Systems

The standard model illustrated is representative of a family of 2-way centre mechanisms, used with our end latches to provide slam action on two sides of a door or panel. Right-hand and left-hand systems are available, with many options to suit (volume) applications.
9/02058
9/02058
9/02058
9/02058
9/02059
9/02059
9/02059
9/02059

Ordering Code

9/02058 2-way system complete, RH
9/02059 2-way system complete, LH
9/02061 2-way mechanism only, LH
Note ’Historic’ models have mechanism length at 1320 mm and ‘F’ dimension 57 mm, and must use end-latches 3/22386.

Specification

All dimensions shown are rounded to the nearest millimetre. Please request a drawing for the exact product specific and tolerances.

A Length of system (extended) (retracted) 2000 mm 1950 mm
B Case length 50 mm
C Case width 75 mm
D Case height 14 mm
E Hole centres (vertical) 38 mm
F Hole centres (horizontal) 62 mm
G Withdrawal (each end) 25 mm
H Hole sizes (diameter) 4 mm
With end latches attached, maximum system length is 2120 mm. Dimensions of end latches (3/22387) shown separately. Full system includes end-latches (3/22387) Striker plates (3/12341), rivets (19-7), and wave washer (58-21).
  • System slams shut, is opened by inside/outside handle or ‘T’-key. It can be slammed even when handle is locked, due to ‘free movement’ allowed by link bars.
  • Rotation of centre follow-bush (8 mm) withdraws link bars and slam bolts. System is handed by direction of rotation of follow bush and position of bars.
  • System is fully plant-on. Plain end of bars should be cut and drilled as required : rivets and washers are supplied with kit. Bolt pull length adjustable.
  • Zinc-plated throughout.
  • - Special link bars to order
    - Permanently-attached inside handle
    - ‘Male drive’ (8 mm square) spindle on inside/outside of latch
    - Alternative end latches
    - Case hole dimensions (F = 57 mm)

Get in touch today!

contact us